Summary About the Position: The incumbent will perform professional engineering duties related to a wide variety of structural engineering features pertinent to the new construction and/or modification of navigation locks and dams, flood control and local protection projects, etc. This announcement is also open to US citizens under announcement number CERE241386449787HP. Responsibilities Produce and review design computations for structural metals, masonry, reinforced and mass concrete, slabs, walls, gates, bulkheads and other structural components of dams and large civil works projects. Produce and review structural portions of dam modification studies, design memoranda, construction drawings, plans and specifications at various stages of completion to ensure compliance with USACE policy and design criteria. Develops design details of structural features for structures such as navigation locks and dams and hydraulic steel structures, determining the engineering principles that apply. Serves as Technical Point of Contact on designated civil works projects designed under contractual agreements with AE contractors. Prepares technical scopes of work and support negotiations. Makes on-site visits for inspections of proposed construction sites to determine solutions for potential or actual problem areas. Performs periodic inspection of existing structures and prepares inspection reports in support of the Dam Safety Program, Hydraulic Steel Structures Program, and Bridge Safety Program. Provides technical analyses, review, and mentoring of less experienced staff on projects and systems that involve complex features. Requirements Conditions of Employment Qualifications Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Civilian Employees of the Organization Current Department of Army Civilian Employees Current Department of Defense (DOD) Civilian Employee (non-Army) Executive Order (E.O.) 12721 Interagency Career Transition Assistance Plan Land Management Workforce Flexibility Act Military Spouses, under Executive Order (E.O.) 13473 Non-Department of Defense (DoD) Transfer People with Disabilities, Schedule A Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible Priority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability Retirement Priority Placement Program, DoD Retained Grade Preference Eligible Re-employed Annuitant Reinstatement Veterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Education Requirement for Engineer: A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting one of the basic education requirements above, to qualify for this position you must also meet the experience requirements listed below. GS-12 Specialized Experience is defined as: One year of Specialized experience is defined as conducting structural engineering work related to locks and dams or other large civil works projects; participating in or leading teams in development of structural design products; addressing safety deficiencies of navigation structures; producing documentation of design; producing construction plans and specifications; and participating in risk informed modifications to large civil work projects. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11). You will be evaluated on the basis of your level of competency in the following areas: Communications Contracting/Procurement Dam Design & Construction Leadership Problem Solving Project Management Structural Engineering Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-11). Education Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this grade level, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/. Additional Information Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration. You will be required to provide proof of U.S. Citizenship. One year trial/probationary period may be required. Direct deposit of pay is required. Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees. If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet. This is a(n) 18 Career Field position. Multiple positions may be filled from this announcement. Salary includes applicable locality pay or Local Market Supplement. Interagency Career Transition Assistance Program (ICTAP). If you are a Federal employee in the competitive service and your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority for this position. To receive selection priority, you must: (1) meet ICTAP eligibility criteria (2) be rated well-qualified for the position and; (3) submit the appropriate documentation to support your ICTAP eligibility. To be considered well-qualified and receive selection priority applicants must satisfy all qualification requirements for the position and receive a score of 90 or above. Additional information about the program is on OPM's Career Transition Resources website. When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit https://www.dfas.mil/civilianemployees/civrelo/Civilian-Moving-Expenses-Tax-Deduction/ for more information. Permanent Change of Station (PCS) allowances may be authorized, subject to the provisions of the Joint Travel Regulations and an agency determination that a PCS move is in the Government Interest. A recruitment/relocation/SLRP incentive may be authorized. If incentives are authorized a service agreement is required.