Summary Lay out, position, align, and fit together fabricated parts of structural and sheet metal building products to weld, bolt or screw together by performing the following duties.

Essential Duties and Responsibilities include the following. Other duties may be assigned.

• Plans sequence of operation.

• Moves parts into position.

• Aligns parts.

• May weld as needed (if certified).

• Straightens warped or bent parts.

• Positions or tightens braces, jacks, clamps, ropes, or bolt straps, or bolts parts in positions for welding or bolting.

• Operates aerial lift or scissor lift (if certified) to reach higher elevations for connecting.

Competencies

To perform the job successfully, an individual should demonstrate the following competencies:

• Analytical - Uses intuition and experience to complement data.

• Design - Demonstrates attention to detail.

• Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations.

• Project Management - Communicates changes and progress; Completes projects on time and budget.

• Technical Skills - Assesses own strengths and weaknesses; Strives to continuously build knowledge and skills; Shares expertise with others.

• Customer Service - Responds promptly to customer needs; Meets commitments.

• Interpersonal Skills - Focuses on solving conflict, not blaming; Maintains confidentiality; Listens to others without interrupting; Keeps emotions under control; Remains open to others' ideas and tries new things.

• Oral Communication - Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Participates in meetings.

• Written Communication - Able to read and interpret written information.

• Teamwork - Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed.

• Visionary Leadership - Displays passion and optimism; Inspires respect and trust.

• Change Management - Builds commitment and overcomes resistance.

• Leadership - Inspires and motivates others to perform well; Accepts feedback from others.

• Quality Management - Looks for ways to improve and promote quality; Demonstrates accuracy and thoroughness.

• Cost Consciousness - Contributes to profits and revenue; Conserves organizational resources.

• Diversity - Demonstrates knowledge of EEO policy; Shows respect and sensitivity for cultural differences; Promotes a harassment-free environment.

• Ethics - Treats people with respect; Keeps commitments; Inspires the trust of others; Works with integrity and ethically; Upholds organizational values.

• Organizational Support - Follows policies and procedures; Supports organization's goals and values; Supports affirmative action and respects diversity.

• Judgement - Displays willingness to make decisions; Exhibits sound and accurate judgment; Supports and explains reasoning for decisions; Includes appropriate people in decision-making process; Makes timely decisions.

• Motivation - Demonstrates persistence and overcomes obstacles; Measures self against standard of excellence.

• Planning/Organizing - Prioritizes and plans work activities; Uses time efficiently; Plans for additional resources.

• Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments.

• Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality.

• Quantity - Meets productivity standards; Completes work in timely manner; Strives to increase productivity; Works quickly.

• Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions ; Uses equipment and materials properly.

• Adaptability - Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events.

• Attendance/Punctuality - Is consistently at work and on time; Arrives at meetings and appointments on time.

• Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals.; Completes tasks on time or notifies appropriate person with an alternate plan.

• Initiative - Volunteers readily; Undertakes self-development activities; Seeks increased responsibilities; Looks for and takes advantage of opportunities; Asks for and offers help when needed.

• Innovation - Meets challenges with resourcefulness; Generates suggestions for improving work; Presents ideas and information in a manner that gets others' attention.

Qualifications

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Experience

One to two years related experience and/or training.

Language Skills

Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.

Mathematical Skills

Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.

Reasoning Ability

Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.

Certificates, Licenses, Registrations

OSHA 10 or 30 is preferred. First Aid/CPR is a plus. Welding certification is a plus.

Other Qualifications

Must be able to travel; have own tools and steel toed boots; pass pre-employment drug screen; e-Verify

Physical Demands

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this Job, the employee is regularly required to stand; use hands to finger, handle, or feel; reach with hands and arms; climb or balance and talk or hear. The employee is frequently required to walk. The employee is occasionally required to sit and stoop, kneel, crouch, or crawl. The employee must regularly lift and /or move up to 50 pounds, frequently lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.

Work Environment

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this Job, the employee is regularly exposed to high, precarious places; fumes or airborne particles and outside weather conditions. The employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions; extreme cold; extreme heat; risk of electrical shock and vibration. The noise level in the work environment is usually moderate.

Dunn Building Company is a design-build general contractor with offices in Birmingham, Mobile, and Athens, AL. Dunn travels all over the southeast specializing in complex concrete foundations and metal building erection as well as industrial maintenance. We offer opportunities for long term employment with growth through mentoring, cross training, and technical education. Dunn offers unmatched benefits including Blue Cross Blue Shield medical/dental/prescription insurance, Aetna life/disability insurance, EyeMed vision care, Colonial Life supplemental insurance policies, 401k, paid time off, paid holidays, bonus potential, and discounted company apparel.